You are here: Index > Steel sheet piles > Marine works

Wharf
The ProfilArbed HZ system was used to build a warfwith the characteristics specified in the adjacent drawing.
The ProfilArbed HZ compound system is ideal for maritime works requiring important strength and flow parameters.
In relation to conventional procedures, this system also notably speeds up the construction times.
In the adjacent example, the HZ 975 D profiles with a height of 26 m were driven and subsequently anchored to 20 m length HZ 975 profiles.
Thus constructed, the two bulk heads support the wharf (external bulk head) and also act as tracks for the portal crane the bed was dragged to -14 m.

Cantieri Navali del Golfo Spa - La Spezia:
Construction of all-purpose maritime terminal (for containers and passengers).

Cantieri Navali del Golfo Spa - La Spezia - Beginning of the main-stream-flow piling:
Photo 1
Photo 2
Photo 3

Cantieri Navali del Golfo Spa - La Spezia - Advancement of the main-stream-flow piling:
Photo 1
Photo 2
Photo 3
Photo 4

Tarros Spa - La Spezia: costruzione di banchina per containers
Construction of wharf for containers

Marina di Ravenna:
Detail of guided pile driving phase HZ 975 h. 26 m

INMA Spa - La Spezia:
Construction of sea wharf with Larssen type steel piles ARBED PU h 22 m

Commercial port of La Spezia:
Photo 1
Photo 2
Photo 3